6-56
Chapter 6: RAID conguration
6.4.5 Viewing SAS topology
1. From the Adapter Properties screen, select SAS Topology.
Press <Alt+D> to display device properties, or <Alt+M> to display more keys.
2. Information about the volume and its member-disks are then displayed.
Esc=ExitMenuF1/Shift+1=Help
Enter = Select Item -/+/Enter = Change Item
LSICorpCongUtilityv6.20.00.00(2007.12.04)
Adapter Properties -- SAS1064E
Adapter SAS1064E
PCI Slot 20
PCI Address(Bus/Dev/Func) 02:00:00
MPT Firmware Revision 1.24.00.00-IR
SASAddress500E0188:01111705
NVDATA Version 2D.02
Status Enabled
Boot Order 0
BootSupport[EnabledBIOS&OS]
RAID Properties
SAS Topology
Advanced Adapter Properties
MorekeysfortheSASTopologydisplay:
C = Clear Device Mappings for Non-Present Devices
R = Refresh SAS Topology
Enter=OnaSASEnclosureorExpander-ExpandorCollapseItem
Enter=OnaDiskDrive-TurnontheLocateLED(nextkeypress
turns off)
Esc=ExitF1/Shift+1=Help
Alt+D = Device Properties Alt+M = More Keys
LSICorpCongUtilityv6.20.00.00(2007.12.04)
SAS Topology -- SAS1064E
DeviceIdentierDevice
SAS1064E(02:00:00) Info
﹂ Enclosure Direct Attach Devices Controller
﹂ IM VOL LSILOGICLogical Volume 3000