Filter
Top Products
ASUS TS300-E5
7-15
7.1.4 Installing the RAID controller driver (for PX4 Model)
Windows
®
Server
During Windows
®
Server installation
To install the RAID controller driver when installing Windows
®
Server:
1. Start the installation:
• Floppy Install: Boot the computer with the Windows Server installation
diskettes.
• CD-ROM Install: Boot from the CD-ROM. Press F6 after the message
“Press F6 if you need to install third party SCSI or RAID driver”
appears.
2. When the Windows Server Setup window is generated, press S to specify an
Additional Device(s).
3. Insert the LSI driver diskette into drive A: and press Enter.
4. Choose LSI 1064E (tm) Controller from the list that appears on screen, and
then press Enter.
5. Press S to use the driver on the oppy disk and then press Enter to continue
with installation.
6. The Windows Server Setup screen will appear again saying “Setup will load
support for the following mass storage devices:” The list will include “LSI
1064E (tm) Controller”.
NOTE: If there are any additional devices to be installed, specify them now.
When all devices are specied, continue to the next step.
7. From the Windows Server Setup screen, press the Enter. Setup will now load
all device les and then continue the Windows Server installation.