Filter
Top Products
5-245-24
5-245-24
5-24
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setup
ECC Redirection [Disabled]ECC Redirection [Disabled]
ECC Redirection [Disabled]ECC Redirection [Disabled]
ECC Redirection [Disabled]
When set to [Enabled], correctable errors are corrected as the data is
passed to the requestor. The data in the DRAM is not corrected if this item
is set to [Disabled]. Configuration options: [Disabled] [Enabled]
DRAM Background Scrubber [Disabled]DRAM Background Scrubber [Disabled]
DRAM Background Scrubber [Disabled]DRAM Background Scrubber [Disabled]
DRAM Background Scrubber [Disabled]
Specifies the scrub rate of the next address to be scrubbed by the DRAM
scrubber. Configuration options: [Disabled] [40.0ns]
L2 Cache Background Scrubber [Disabled]L2 Cache Background Scrubber [Disabled]
L2 Cache Background Scrubber [Disabled]L2 Cache Background Scrubber [Disabled]
L2 Cache Background Scrubber [Disabled]
Specifies the scrub rate of the next address to be scrubbed by the L2
cache scrubber. Configuration options: [Disabled] [40.0ns]
DCache Background Scrubber [Disabled]DCache Background Scrubber [Disabled]
DCache Background Scrubber [Disabled]DCache Background Scrubber [Disabled]
DCache Background Scrubber [Disabled]
Specifies the scrub rate of the next address to be scrubbed by the data
cache scrubber. Configuration options: [Disabled] [40.0ns]
5.4.35.4.3
5.4.35.4.3
5.4.3
ChipsetChipset
ChipsetChipset
Chipset
This menu shows the chipset configuration settings. Select an item then
press <Enter> to display a pop-up menu with the configuration options.
OnChip IDE Channel0 [Enabled]OnChip IDE Channel0 [Enabled]
OnChip IDE Channel0 [Enabled]OnChip IDE Channel0 [Enabled]
OnChip IDE Channel0 [Enabled]
Enables or disables the on-chip IDE channel 0. Configuration options:
[Disabled] [Enabled]
OnChip IDE Channel1 [Enabled]OnChip IDE Channel1 [Enabled]
OnChip IDE Channel1 [Enabled]OnChip IDE Channel1 [Enabled]
OnChip IDE Channel1 [Enabled]
Enables or disables the on-chip IDE channel 1. Configuration options:
[Disabled] [Enabled]
F1:Help
↑↓ ↑↓
↑↓ ↑↓
↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→← →←
→← →←
→←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Phoenix-Award BIOS CMOS Setup Utility
Advanced
Select Menu
Item Specific Help
Disable/Enable OnChip IDE
Channel0.
Chipset
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
Hyper Transport Frequency [4x]
Hyper Transport Width [
↓↓
↓↓
↓16
↑↑
↑↑
↑16]
Errata 94 Enhanced [Auto]
System BIOS Cacheable [Disabled]
Spread Spectrum [Enabled]
SATA Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
SSE/SSE2 Instructions [Enabled]
Init Display First [PCI Slot]
IDE DMA Transfer Access [Enabled]
Serial-ATA 1 [Enabled]
SATA DMA Transfer [Enabled]
Serial-ATA 2 [Enabled]
SATA2 DMA Transfer [Enabled]
IDE Prefetch Mode [Enabled]