Filter
Top Products
2-172-17
2-172-17
2-17
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2
2.7 Hard disk drives
2.7.12.7.1
2.7.12.7.1
2.7.1
Installing a hot-swap SATA HDDInstalling a hot-swap SATA HDD
Installing a hot-swap SATA HDDInstalling a hot-swap SATA HDD
Installing a hot-swap SATA HDD
Follow these instructions to install a hot-swap SATA hard disk drive (HDD).
1. Open the front bezel to access
the hot-swap drive trays.
2. Release a drive tray by pushing
the spring lock to the right,
then pulling the tray lever
outward. The drive tray ejects
slightly after you pull out the
lever.
3. Firmly hold the tray lever and
pull the drive tray out of the
bay.
4. An empty drive tray requires a metal bracket for support. Use a
Phillips (cross) screwdriver to remove the bracket when you are ready
to install a hard disk in the drive tray.
Metal bracketMetal bracket
Metal bracketMetal bracket
Metal bracket
Tray leverTray lever
Tray leverTray lever
Tray lever
Spring lockSpring lock
Spring lockSpring lock
Spring lock