Filter
Top Products
2-192-19
2-192-19
2-19
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2
2.7.22.7.2
2.7.22.7.2
2.7.2
Installing an internal SATA HDDInstalling an internal SATA HDD
Installing an internal SATA HDDInstalling an internal SATA HDD
Installing an internal SATA HDD
Your package comes with specially designed hard disk drive rails if you want
to install the hard disk drives internally (not hot-swap). Depending on which
bay you wish to install your hard disk drive, the orientation of the drive rails
vary so that the screw holes match those on the drive.
For identification purposes, the drive rails are referred to as “Rail 1” and
“Rail 2” as shown below.
Installing a SATA hard disk drive to the first hard diskInstalling a SATA hard disk drive to the first hard disk
Installing a SATA hard disk drive to the first hard diskInstalling a SATA hard disk drive to the first hard disk
Installing a SATA hard disk drive to the first hard disk
drive cagedrive cage
drive cagedrive cage
drive cage
To install a SATA hard disk drive to the first hard disk drive cage:
1. Remove the front panel assembly. Refer to section 2.5.1 for
instructions.
2. Use a Phillips (cross) screwdriver to attach
Rail 1 Rail 1
Rail 1 Rail 1
Rail 1 to the side of the
drive as shown. The rail end should be on the side of the drive
connectors.
Take note of the correct orientation of the drive rails. There is only one
correct correct
correct correct
correct way to attach the rails when installing drives on the hard disk
drive cage.
Rail 1Rail 1
Rail 1Rail 1
Rail 1
Rail 2Rail 2
Rail 2Rail 2
Rail 2
Rail handleRail handle
Rail handleRail handle
Rail handle
Hole 1Hole 1
Hole 1Hole 1
Hole 1
Hole 2Hole 2
Hole 2Hole 2
Hole 2
Hole 3Hole 3
Hole 3Hole 3
Hole 3
HoleHole
HoleHole
Hole
44
44
4
Hole 1Hole 1
Hole 1Hole 1
Hole 1
Hole 3Hole 3
Hole 3Hole 3
Hole 3
RailRail
RailRail
Rail
handlehandle
handlehandle
handle
Drive connectorsDrive connectors
Drive connectorsDrive connectors
Drive connectors