Filter
Top Products
5-185-18
5-185-18
5-18
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setup
Before attempting to configure a hard disk drive, make sure you have
the correct configuration information supplied by the drive
manufacturer. Incorrect settings may cause the system to fail to
recognize the installed hard disk.
Access Mode [Auto]Access Mode [Auto]
Access Mode [Auto]Access Mode [Auto]
Access Mode [Auto]
Allows selection of the sector addressing mode. The default [Auto] allows
automatic detection of an IDE hard disk drive. Select [CHS] for this item if
you set the Primary IDE Master to [Manual] to manually enter the drive
information. Configuration options: [CHS] [LBA] [Large] [Auto]
Manually detecting an IDE driveManually detecting an IDE drive
Manually detecting an IDE driveManually detecting an IDE drive
Manually detecting an IDE drive
To manually enter the drive information, set the Primary IDE Master item to
[Manual], and the Access Mode item to [CHS].
F1:Help
↑↓ ↑↓
↑↓ ↑↓
↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→← →←
→← →←
→←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Phoenix-Award BIOS CMOS Setup Utility
Main
Select Menu
Item Specific Help
Set a PIO mode for the
IDE device. Mode0 through
4 successive increase in
performance.
Primary IDE Master
PIO Mode [Auto]
UDMA Mode [Auto]
Primary IDE Master [Manual]
Access Mode [CHS]
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
Transfer Mode None
S.M.A.R.T Status None
To enter the number of cylinder, head, precomp, landing zone, sector per
track for the drive, highlight an item, key-in the value that you obtained
from the drive label or documentation, then press <Enter>.
To enter a value, you may also highlight the item, then press <Enter> to
display a pop-up menu. Type in the value indicated in the drive label or
documentation, the press <Enter>.
CapacityCapacity
CapacityCapacity
Capacity
Displays the auto-detected hard disk capacity.
CylinderCylinder
CylinderCylinder
Cylinder
Shows the number of the hard disk cylinders.