Filter
Top Products
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2
6-76-7
6-76-7
6-7
Creating a RAID 1 set (Mirror)Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)
To create a RAID 1 set:
1. From the
Define a New Array Define a New Array
Define a New Array Define a New Array
Define a New Array menu, select
RAID ModeRAID Mode
RAID ModeRAID Mode
RAID Mode, then
press <Enter>. A pop-up menu appears.
2. Use the up or down arrow keys to select
MirroringMirroring
MirroringMirroring
Mirroring, then press <Enter>.
Mirroring
Striping
Stripe Mirroring
Spanning
5. Press <TAB> to move to the
Free Disks Free Disks
Free Disks Free Disks
Free Disks section.
6. Highlight the hard disk drives that you want to add in the RAID set,
then press the right arrow key to select. The selected hard disk drives
appear in the
Array DisksArray Disks
Array DisksArray Disks
Array Disks section. Repeat the process until all
desired hard disk drives are added.
Clear disk data?
[Y] YES [N] Cancel
7. After selecting the hard disk drives, press
<F7> to create the RAID 1 set. A pop-up
window appears.
8. Press <Y> to delete all data from the hard disk drives and continue
creating the RAID set. Press <N> to backup exisitng data to a target
hard disk drive.
You will lose all data on the drives if you clear the disk data!
9. The utility displays the created RAID 1 set. Press <Ctrl+X> to save
your settings and exit the utility.0
[F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode:
Mirroring Striping Block: Optimal
Free Disks Array Disks
Loc Disk Model Name Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX 1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX [→] Add
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[←] Del