Filter
Top Products
2-372-37
2-372-37
2-37
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2
To install a floppy disk drive:
1. Position the floppy drive
vertically with the eject button
on the left side (close to the
HDDs).
2. Connect the drive signal cable
and power cable.
4. Secure the drive cage with a
screw.
3. Carefully push the drive into the
bay until the drive cage fits the
front edge of the bay.
Floppy drive power cableFloppy drive power cable
Floppy drive power cableFloppy drive power cable
Floppy drive power cable
Red stripe to match Pin 1 onRed stripe to match Pin 1 on
Red stripe to match Pin 1 onRed stripe to match Pin 1 on
Red stripe to match Pin 1 on
the connectorthe connector
the connectorthe connector
the connector
Floppy drive signal cableFloppy drive signal cable
Floppy drive signal cableFloppy drive signal cable
Floppy drive signal cable