Filter
Top Products
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2
5-355-35
5-355-35
5-35
Restore on AC Power Loss [Power Off]Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off]Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into “off state” after an AC
power interruption. When set to [Power On], the system turns on
automatically after a power interruption. When set to [Last State], the
system goes into whatever was the system state (on or off) before the
power interruption. Configuration options: [Power Off] [Power On]
[Last State]
Power On By PCI Devices [Disabled]Power On By PCI Devices [Disabled]
Power On By PCI Devices [Disabled]Power On By PCI Devices [Disabled]
Power On By PCI Devices [Disabled]
Allows you to enable or disable the PME to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
WOR(RI#) From Soft-Off [Disabled]WOR(RI#) From Soft-Off [Disabled]
WOR(RI#) From Soft-Off [Disabled]WOR(RI#) From Soft-Off [Disabled]
WOR(RI#) From Soft-Off [Disabled]
Allows you to enable or disable wake-up on ring.
Configuration options: [Disabled] [Enabled]
USB Wake-up From S1/S3 [Disabled]USB Wake-up From S1/S3 [Disabled]
USB Wake-up From S1/S3 [Disabled]USB Wake-up From S1/S3 [Disabled]
USB Wake-up From S1/S3 [Disabled]
Allows you to enable or disable wake-up from S1/S3 by USB keyboard or
mouse. Configuration options: [Disabled] [Enabled]
Power On By Alarm [Disabled]Power On By Alarm [Disabled]
Power On By Alarm [Disabled]Power On By Alarm [Disabled]
Power On By Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event. When
this item is enabled, the items
Date of Month AlarmDate of Month Alarm
Date of Month AlarmDate of Month Alarm
Date of Month Alarm and
TimeTime
TimeTime
Time
(hh:mm:ss) Alarm(hh:mm:ss) Alarm
(hh:mm:ss) Alarm(hh:mm:ss) Alarm
(hh:mm:ss) Alarm items become user-configurable with set values.
Configuration options: [Disabled] [Enabled]
Day of Month Alarm [0]Day of Month Alarm [0]
Day of Month Alarm [0]Day of Month Alarm [0]
Day of Month Alarm [0]
To set the date of alarm, highlight this item and press <Enter> to display
the Day of Month Alarm pop-up menu. Key-in a value within the specified
range then press <Enter>. Configuration options: [Min=0] [Max=31]
Time (hh:mm:ss) Alarm [0 : 0 : 0]Time (hh:mm:ss) Alarm [0 : 0 : 0]
Time (hh:mm:ss) Alarm [0 : 0 : 0]Time (hh:mm:ss) Alarm [0 : 0 : 0]
Time (hh:mm:ss) Alarm [0 : 0 : 0]
To set the time of alarm:
1. Highlight this item and press <Enter> to display a pop-up menu for the
hour field.
2. Key-in a value (Min=0, Max=23), then press <Enter>.
3. Press <TAB> to move to the minutes field then press <Enter>.
4. Key-in a minute value (Min=0, Max=59), then press <Enter>.
5. Press <TAB> to move to the seconds field then press <Enter>.
6. Key-in a value (Min=0, Max=59), then press <Enter>.