Filter
Top Products
CM1164 RS-232 Control Tool
10
PiP Mode
The PiP Mode command allows you to change the Picture in Picture display
mode settings. Use the Formula - to set Parameters - to create a Command.
Formulas:
PiP Channel/Port Setting:
Command + Control1 + Control2 + Control3 + Control4 + Control5 + [Enter]
PiP Configuration Setting:
Command + Config1 + Config2 + Config3 + Config4 + Config5 + [Enter]
PiP Setting Execute:
Command + Execute + [Enter]
PiP Advance Setting:
Command + Control1 + Control2 + Config1 + Config2 + Execute + [Enter]
Parameters:
Command Description
pip2 Picture in Picture Dual Mode
pip3 Picture in Picture Triple Mode
pip4 Picture in Picture Quad Mode
Control Description
cxpy c: Output channel, x= 1~4
p: Input port, y= 1~4
Example: c2p4
Config Description
cxscanon Enable channel scan under PiP3 or PiP2
mode, x= 2~3 (Channel ID)
Example: c2scanon
cxscanoff Disable channel scan under PiP3 mode, x=
2~3 (Channel ID)
Example: c2scanoff
cxalphaon Enable channel alpha mode, x= 2~4
(Channel ID)
Example: c3alphaon