Filter
Top Products
CM1164 RS-232 Control Tool
6
Login
The Login command allows you to login to the CM1164 and begin sending RS-
232 commands. When you login the RS-232 link is “opened” and the CM1164
will not respond to front panel pushbuttons, hotkeys, OSD, or remote control
commands - until the RS-232 link is closed (see Open/Close RS-232 Link,
page 8). For username/password information, see Security, page 22. Use the
Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + Number + [Enter]
Parameters:
Login Command
The available formula for the Login command is as follows:
1. Command + Control + Number + [Enter]
For example, to login to the system with the password 123456, type the
following:
login p123456 [Enter]
Note: Each command string can be separated with a space.
Command Description
login Login Command
Control Description
p Input password
Number Description
xxxxxx Sets 6 digit password, x= 0~9
Enter Description
Enter Enter and send out command