Filter
Top Products
CM1164 RS-232 Control Tool
12
Quad View Mode
The Quad View Mode command allows you to change the Quad View display
mode settings. Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control1 + Control2 + Control3 + Control4 + [Enter]
Reset to Default:
Command + Control + [Enter]
Parameters:
Quad View Mode Commands
Some available formulas for Quad View Mode commands are as follows:
1. Command + Control1 + Control2 + Control3 + Control4 + [Enter]
For example, to set Quad View Mode to use output channel 2 with input port
3, type the following:
quad c2p3 [Enter]
2. Command + Control + [Enter]
For example, to set Quad View Mode to the default settings, type the
following:
quad default [Enter]
Note: Each command string can be separated with a space.
Command Description
quad Quad View Mode Command
Control Description
cxpy c: Output channel, x= 1~4
p: Input port, y= 1~4
Example: c2p4
default Resets Quad View Mode back to the default
setting Example: c1p1~c4p4
Enter Description
Enter Enter and send out command