Filter
Top Products
CM1164 RS-232 Control Tool
30
Activate Beeper
The Activate Beeper command allows you to enable/disable the beeper
function. Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Activate Beeper Commands
Some available formulas for Activate Beeper commands are as follows:
1. Command + Control + [Enter]
For example, to enable the beeper, type the following:
beeper on [Enter]
2. Command + Control + [Enter]
For example, to disable the beeper, type the following:
beeper off [Enter]
Note: Each command string can be separated with a space.
Command Description
beeper Activate Beeper Command
Control Description
off Disable beeper
on Enable beeper
Enter Description
Enter Enter and send out command