Filter
Top Products
CM1164 RS-232 Control Tool
7
Logout
The Logout command allows you to logout of the CM1164 and close the RS-
232 link. Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + [Enter]
Parameters:
Logout Command
The available formula for the Logout command is as follows:
1. Command + [Enter]
For example, to logout of the CM1164, type the following:
logout [Enter]
Note: Each command string can be separated with a space.
Command Description
logout Logout Command
Enter Description
Enter Enter and send out command