Filter
Top Products
CM1164 RS-232 Control Tool
37
Firmware Upgrade
The Firmware Upgrade command allows you to enable the firmware upgrade
mode. Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Firmware Upgrade Command
The available formula for the Firmware Upgrade command is as follows:
1. Command + Control + [Enter]
For example, to enable firmware upgrade mode, type the following:
upgrade on [Enter]
Note: Each command string can be separated with a space.
Command Description
upgrade Firmware Upgrade Command
Control Description
on Enable firmware upgrade mode
Enter Description
Enter Enter and send out command