Filter
Top Products
CM1164 RS-232 Control Tool
24
Station
The Station command allows you to switch the console focus to the next station
in a daisy chain setup. Use the Formula - to set Parameters - to create a
Command.
Formulas:
Command + Control + Number + [Enter]
Parameters:
Station Commands
An available formula for the Station command is as follows:
1. Command + Control + Number + [Enter]
For example, to switch the console to station 2 of a daisy chain, type the
following:
station id2 [Enter]
Note: Each command string can be separated with a space.
Command Description
station Station Command
Control Description
id Station ID
Number Description
x Station number of switch in daisy chain, x=
1~4
Enter Description
Enter Enter and send out command