Filter
Top Products
CM1164 RS-232 Control Tool
18
Set Operating System
The Set Operating System command allows you to set the operating system for
a port. Use the Formula - to set Parameters - to create a Command.
Formula:
Command + Control + Control1 + [Enter]
Parameters:
Set Operating System Commands
Some available formulas for Set Operating System commands are as follows:
1. Command + Control + Control1 + [Enter]
For example, to change port 3’s operating system to Mac, type the following:
os p3 mac [Enter]
2. Command + Control + Control1 + [Enter]
For example, to change port 2’s operating system to Auto Detect, type the
following:
os p2 auto [Enter]
Note: Each command string can be separated with a space.
Command Description
os Set Operating System Command
Control Description
px p: Port number, x= 1~4
Example: p2
Control1 Description
auto Change operating system to Auto Detect
mac Change operating system to Mac
sun Change operating system to Sun
spc Change operating system to SPC (Linux)
Enter Description
Enter Enter and send out command