Filter
Top Products
CM1164 RS-232 Control Tool
31
Hotkey Setting
The Hotkey Setting command allows you to enable/disable and change the
hotkey used to invoke the HSM (Hotkey Setting Mode). Use the Formula - to
set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Hotkey Setting Commands
Some available formulas for Hotkey Setting commands are as follows:
1. Command + Control + [Enter]
For example, to enable the hotkey function, type the following:
hotkey on [Enter]
2. Command + Control + [Enter]
For example, to change the HSM invoke key to [Ctrl] + [F12], type the
following:
hotkey f12 [Enter]
Note: Each command string can be separated with a space.
Command Description
hotkey Hotkey Setting Command
Control Description
num Change the HSM invoke key to:
[Num Lock] + [-]
f12 Change the HSM invoke key to:
[Ctrl] + [F12]
off Disable hotkey function
on Enable hotkey function
Enter Description
Enter Enter and send out command