Filter
Top Products
CM1164 RS-232 Control Tool
19
Auto Scan
The Auto Scan command allows you to set and enable Auto scan mode. Use
the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Set Scan Duration:
Command + Control + Number + [Enter]
Parameters:
Auto Scan Commands
Some available formulas for Auto Scan commands are as follows:
1. Command + Control + [Enter]
For example, to auto scan all ports, type the following:
scan all [Enter]
2. Command + Control + Number + [Enter]
For example, to set the scan’s focus on each port for a duration of 44 seconds
before continuing on, type the following:
scan t44 [Enter]
Note: Each command string can be separated with a space.
Command Description
scan Auto Scan Command
Control Description
all Auto scan all ports
pon Auto scan all ports with computers powered
on
txx Sets the KVM focus duration when
scanning, xx= 1~99 seconds
Example: t33
Enter Description
Enter Enter and send out command