Filter
Top Products
CM1164 RS-232 Control Tool
33
Power on Detection
The Power on Detection command allows you to enable/disable the power on
detection feature. Use the Formula - to set Parameters - to create a
Command.
Formulas:
Command + Control + [Enter]
Parameters:
Power on Detection Commands
Some available formulas for Power on Detection commands are as follows:
1. Command + Control + [Enter]
For example, to enable power on detection, type the following:
pod on [Enter]
2. Command + Control + [Enter]
For example, to disable power on detection, type the following:
pod off [Enter]
Note: Each command string can be separated with a space.
Command Description
pod Power on Detection Command
Control Description
on Enable power on detection function
off Disable power on detection function
Enter Description
Enter Enter and send out command