Filter
Top Products
CM1164 RS-232 Control Tool
4
Console Login - HyperTerminal
Once a physical connection from the computer to the CM1164 has been made,
you can establish a HyperTerminal session using the instructions below.
1. Open the HyperTerminal application, and configure the port settings for
COM1 port, then click OK.
Bits per Second: 115200, Data Bits: 8, Parity: None, Stop bits: 1, Flow Control:
None.
2. When configured correctly a login prompt like the one below appears:
Since this is the first time you are logging in, use the default Login:
administrator; and the default Password: 111111.