Filter
Top Products
CM1164 RS-232 Control Tool
32
OSD Hotkey
The OSD Hotkey command allows you to change the hotkey used to invoke the
OSD. Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
OSD Hotkey Commands
Some available formulas for OSD Hotkey commands are as follows:
1. Command + Control + [Enter]
For example, to change the OSD invoke key to [Scroll] + [Scroll], type the
following:
osdkey scroll [Enter]
2. Command + Control + [Enter]
For example, to change the OSD invoke key to [Ctrl] + [Ctrl], type the
following:
osdkey ctrl [Enter]
Note: Each command string can be separated with a space.
Command Description
osdkey OSD Hotkey Command
Control Description
scroll Change OSD invoke key to: [Scroll] [Scroll]
ctrl Change OSD invoke key to: [Ctrl] [Ctrl]
Enter Description
Enter Enter and send out command