Filter
Top Products
CM1164 RS-232 Control Tool
34
Fn Key
The Fn Key command allows you to save and select Fn keys for a focused ports
display settings. Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + Enter
Command + Control + Number + [Enter]
Parameters:
Fn Key Commands
Some available formulas for Fn Key commands are as follows:
1. Command + Control + Number + [Enter]
For example, to save the display setting and current port focus as Fn1, type the
following:
fn save1 [Enter]
2. Command + Control + [Enter]
For example, to set all Fn keys back to the default, type the following:
fn default [Enter]
Note: Each command string can be separated with a space.
Command Description
fn Fn Key Command
Control Description
savex Save display setting for current port focus,
x= 1~4
Example: save3
default Restore all Fn key settings to the default
selectx Enable display setting for current port focus,
x= 1~4
Example: select2
Enter Description
Enter Enter and send out command