ATTO Technology V-Class Network Card User Manual


 
x
Diamond Storage Array Installation and Operation Manual
Appendix C Sample Zoning Command Sequences
First time configuration (after download)
QuickRAID or JBOD under Zoning “first time” configuration, an all/all/all configuration in the selected
QuickRAID configuration. All zone commands except
ZoneCommit
affect only the planned configuration.
ZoneCommit
sets the Planned Configuration into the Active Configuration
.
Simple
2 hosts, Diamond in JBOD configuration (24 LUNs). Hosts can use different operating systems. All zone
commands except
ZoneCommit
affect only the planned configuration.
ZoneCommit
sets the Planned
Configuration into the Active Configuration.
Symmetric Model
1 host, 1 switch, Diamond in JBOD configuration (24 LUNs). All host ports travel through a switch to both
Diamond ports. Zoning is not required, since there is no reason to restrict host/HBA/Port access. All zone
commands except
ZoneCommit
affect only the planned configuration.
ZoneCommit
sets the Planned
Configuration into the Active Configuration.
ZoneClearAll Clears any previously-defined zones
ZoneCommit Sets the new zoning configuration.
ZoneClearAll Clears any previously defined zones from the planned
configuration.
ZoneCreate zone_1 Creates a zone named zone_1
ZoneAddHost zone_1
20:00:00:10:86:00:01:34
Adds host WWPN to zone_1
ZoneAddDevice zone_1 1 4 Adds LUN 1 and 4 to zone_1
ZoneAddPort zone_1 0 LUN 1 and LUN 4 will be available through HIC 0 for only
the host in zone_1
ZoneCreate zone_2 Creates a zone named zone_2
ZoneAddHost zone_2
20:00:00:60:00:00:12:34
Adds host WWPN to zone_2
ZoneAddDevice zone_2 7 Adds LUN 7 to zone_2
ZoneAddPort zone_2 1 LUN 7 will be available through HIC 1 for only the host in
zone_2
ZoneState zone_1 enabled Enables zone_1.
ZoneState zone_2 enabled Enables zone_2.
ZoneCommit Sets the Planned Zoning Configuration into the Active
configuration. No other LUNs will be available to any host.
ZoneClear all Clears any previously-defined zones from the planned configuration
ZoneCommit Copies what is in the Planned Zoning Configuration to the Active Configuration: in this
case, clears any previously-defined zones.