Filter
Top Products
34
General use CLI commands
4.5.2 General Use Commands
The following commands, listed alphabetically, describe or perform general functions.
FirmwareRestart
Causes a warm restart of the Diamond Storage Array.
Immediate command: FirmwareRestart
Help
Displays a list of available commands. Type ‘help’
followed by a command name to display detailed
command-specific information.
Get syntax: Help [Command Name]
PartitionCommit
Commits the current Planned Partition Configuration,
making it the persistent, Active configuration.
PartitionCommit must be used to alter any partition
settings. Performs a firmware restart.
Set syntax: PartitionCommit
Get syntax: none
SaveConfiguration
If the restart option is selected, the Diamond cycles its
power. The norestart option saves changes without
restarting. Please note: certain modifications require a
SaveConfiguration command and a system restart. If
required, the return
Ready
. * displays after the return for
the modification. You may make several changes through
commands and SaveConfiguration before implementing
a restart, but once you have restarted the Diamond, all the
command changes created before the restart and saved are
implemented. Changes to zones, however, are unaffected
by SaveConfiguration. You must use ZoneCommit.
Restart or no Restart parameter is optional
Set syntax: SaveConfiguration <Restart| NoRestart>
SystemSN
Stores the Diamond Storage Array serial number. The
serial number may be one to 16 characters.
Set syntax: set SystmSN [n]
Requires a SaveConfiguration command
Get syntax: get SystemSN
VerboseMode
Specifies the detail of verbal feedback for the CLI.
Disabling this option removes parameter names from
‘get’ commands and removes descriptions from ‘help’
commands.
Choices: enabled, disabled
Default: enabled (returns have parameter information)
Set syntax: set VerboseMode [enabled | disabled]
Get syntax: get VerboseMode
ZoneCommit
Commits the current Planned Zone Configuration File,
making it the persistent, active configuration.
Set syntax:
ZoneCommit