Filter
Top Products
36 DSR Switch Installer/User Guide
Figure 3.18: OSCAR Interface Commands Dialog Box
Enabling or disabling Broadcasting
To turn Broadcasting on:
1. If the OSCAR interface is not open, press Print Screen to open the Main dialog box.
2. Click Commands to open the Commands dialog box.
3. Select the Broadcast Enable checkbox to activate Broadcasting.
4. From the user station, type the information and perform the mouse movements you wish
to
broadcast.
To turn Broadcasting off:
From the Commands dialog box, clear the Broadcast Enable checkbox.
Enabling or disabling Scan mode
To start the Scan mode:
1. If the OSCAR interface is not open, press Print Screen to open the Main dialog box.
2. Click Commands to open the Commands dialog box.
3. Select Scan Enable in the Commands dialog box.
4. Click X to close the Commands dialog box.
NOTE: Scanning will begin as soon as the Scan Enable button is selected.
To cancel Scan mode:
Select a target device if the OSCAR interface is open.
-or-