Filter
Top Products
Chapter 4: Web Interface Operations 53
Power Controlling Target Devices
NOTE: You must have administrator privileges to change power control device settings.
If a target device is connected to a power control device outlet, you may power up, power down or
cycle (power target device down and then up) the target device using the DSR switch on-board
web
interface.
To power up a target device:
1. Select Appliance - Appliance Settings - Ports - Power Units from the DSR Explorer window.
2. Click the name of the unit you wish to power up, and select Sockets.
3. Select the checkbox to the left of the device that you wish to power.
4. Click the On button.
To power down a target device:
1. Select Appliance - Appliance Settings - Ports - Power Units - Sockets from the DSR Explorer
window. The sockets window will appear.
2. Select the checkbox to the left of the device that you wish to power down.
3. Click the Off button.
To power cycle a target device:
1. Select Appliance - Appliance Settings - Ports - Power Units - Sockets from the DSR Explorer
window. The sockets window will appear.
2. Select the checkbox to the left of the device that you wish to cycle.
3. Click the Cycle button.
To change the minimum on time, off time or wake up state:
1. Select Appliance - Appliance Settings - Ports - Power Units - Sockets from the DSR Explorer
window. The sockets window will appear.
2. Click the socket name that you wish to modify.
3. Use the drop-down windows to alter the desired settings.
4. Click the Save button to exit.
To view device details regarding the connected SPC device:
Select Appliance - Appliance Settings - Ports - Power Units - Settings from the DSR
Explorer
window.