Filter
Top Products
12. Alignment menu
Image 12-70
DLP Leakage area set up
After the area is set, use TEXT key to remove the area border lines when adjusting the black level.
How to set the leakage area width
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select ScenergiX and press ENTER.
4. Use the ▲ or ▼ key to select Black level and press ENTER.
5. Use the ▲ or ▼ key to select one of the four size adjustments and press ENTER. (image 12-71, image 12-72, image 12-73,
image 12-74, image 12-75)
6. Use the cursor keys to move the green border line to the desired position.
The leakage area for this overlap is defined and will b
e excluded during black level adjustment.
Image 12-71
Image 12-72
Image 12-73
134 R59770021 CLM R10+ 11/10/2010