Filter
Top Products
9. Image menu
5. Use the ▲ or ▼ key to select Clamp delay or Clamp width and press ENTER.
A progress bar appears.
6. Use the ▲ or ▼ key to change the setting. (image 9-67, image 9-68, image 9-69, image 9-70)
Image 9-67
Image 9-68
Image 9-69
Image 9-70
How to change the field polarity?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Image and press ENTER.
3. Use the ▲ or ▼ key to select Advanced settings and press ENTER.
The Advanced settings menu is displayed.
4. Use the ▲ or ▼ key to select Field polarity and press ENTER to toggle between [neg] or [pos]. (image 9-71, image 9-72,
image 9-73, image 9-74)
Image 9-71
Image 9-72
Image 9-73
R59770021 CLM R10+ 11/10/2010 89