Filter
Top Products
D. Specifications
D. SPECIFICATIONS
Overview
•Specifications CLM R10+
•Specifications CLM 5 cable input (multi purpose)
•Specifications CLM HDSDI – SDI input
•Specifications CLM DVI input
•Specifications CLM DVI HDCP input
D.1 Specifications CLM R10+
Overview
AC power 100 - 240 VAC (±10%)/50-60 Hz
Aspect Ratio 4:3
Brightness uniformity 95%
Communication Port 10/100 Mb/s Ethernet (on RJ45)
RS-232/422 (on D9)
IR external
XLR wired
Contrast ratio 1,200:1 (full field)
Dimensions 293 x 442 x 692 mm
Display
Single-chip DLP (0.95’ DMD™ x1)
Electromagnetic Interference Complies with FCC rules & regulations, part 15 Class A and CE EN55022 Class A
Features
Picture in picture (up to two sources on-screen simultaneously)
Optional 3D
Input Input
DVI
1x YUV1 (on RCA/cinch)
1x Composite video (on RCA/cinch)
1x S-Video (on 4-pin mini-DIN)
Compatibility
All current video sources (PAL, SECAM, NTSC) in Composite, S-VHS, Component or
RGB formats
All current HDTV sources
All computer graphics formats from VGA, SVGA, XGA, SXGA, full HD to UXGA
Lamp lifetime (typical) 750/1,250hrs
Lamp type & power
4x300W UHP
Lens Shift Vertical: x> -20% to +110%
Horizontal: x> -15% to +100%
(small differences occur per lens type)
(short throw lenses have less shift)
Light Output Typically 9,500 ANSI lumens (±10%)
Typically 10,000 center lumens (±10%)
Network connection
10/100 base - T
Projector Toolset control
3rd party device control
Noise Level 49 dB
R59770021 CLM R10+ 11/10/2010 199