Filter
Top Products
E. Troubleshooting
Error
code
Description Error Warning
Caused by
Action
7862 Lamp 1 run
time shtdwn
exceeded
-
Yes
7861 Lamp 2 run
time msg
exceeded
-
Yes
Run time of lamp 2 will be exceeded
Replace the lamp with a new one.
Call a qualified service engineer
7860 Lamp 2 run
time warning
exceeded
-
Yes Run time of lamp 2 is exceeded Replace the lamp with a new one.
Call a qualified service engineer
7859 Lamp 2 run
time max
exceeded
-
Yes
The maximum run time for the lamp
is exceeded
Replace the lamp with a new one.
Call a qualified service engineer
7858 Lamp 2 run
time shtdwn
exceeded
-
Yes
7857 Lamp 3 run
time msg
exceeded
-
Yes Run time of lamp 3 will be exceeded Replace the lamp with a new one.
Call a qualified service engineer
7856 Lamp 3 run
time warning
exceeded
-
Yes
Run time of lamp 3 is exceeded
Replace the lamp with a new one.
Call a qualified service engineer
7855 Lamp 3 run
time max
exceeded
-
Yes
The maximum run time for the lamp
is exceeded
Replace the lamp with a new one.
Call a qualified service engineer
7854 Lamp 3 run
time shtdwn
exceeded
-
Yes
7853 Lamp 4 run
time msg
exceeded
-
Yes
Run time of lamp 4 will be exceeded
Replace the lamp with a new one.
Call a qualified service engineer
7852 Lamp 4 run
time warning
exceeded
-
Yes
Run time of lamp 4 is exceeded
Replace the lamp with a new one.
Call a qualified service engineer
7851 Lamp 4 run
time max
exceeded
-
Yes The maximum run time for the lamp
is exceeded
Replace the lamp with a new one.
Call a qualified service engineer
7850 Lamp 4 run
time shtdwn
exceeded
-
Yes
7600
Color wheel not
spinning
Yes Yes
If problem persists, call a qualified
service engineer
7500 Failed to set
FCB mode
7499 FCB time out
7498 FCB I2C
7497 FCB
parameters
7496
FCB
monitoring
8000
Opening
shutter failed
No Yes
If problem persists, call a qualified
service engineer
8001 Closing shutter
failed
No Yes If problem persists, call a qualifi ed
service engineer
8002 Failed reading
lamp info mode
No Yes
If problem persists, call a qualified
service engineer
9199
Scaler unit
failed
Yes
-
Initialization of the scaler failed If problem persists, call a qualified
service engineer
9198 Scaler pixel
clock too high
Yes
-
BW or refresh rate of input source
too high
206 R59770021 CLM R10+ 11/10/2010