Filter
Top Products
14. Service menu
The service window opens.
3. Use the ▲ or ▼ key to select Save custom settings and press ENTER.
The custom settings are written to the internal backup device. A message menu “Save data ...” is displayed during the save
operation. (image 14-44, image 14-45)
Image 14-44
Image 14-45
14.7 Refill mode
Before selecting Refill mode, take first all preparations necessary to refill the cooling circuit.
What can be done?
When all preparations are taken, the refill mode will automatically activate the refill process.
How to start the refill mode
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Refill mode and press ENTER.
Arefill confirmation message is displayed.
4. Use the ▲ or ▼ key to select Yes or No and press ENTER.
Yes will switch the projector in refill mode.
When No is selected, the projector stays in normal mode. (image 14-46, image 14-47, image 14-48)
Image 14-46
Image 14-47
Image 14-48
When the projector was in standby while sel
ecting Refill mode, then the water-cooling pump will start pump-
ing. Repower the projector to finish the refilll mode.
When the projector was playing, it remains playing.
162 R59770021 CLM R10+ 11/10/2010