Filter
Top Products
8. Input menu
Input
module
Indication Description
RGB SOG RGB input with sync on green
YUV HS/VS - CS Component video with separate horizontal and vertical sync or separate composite
sync.
YUV CV Component video with composite video as sync signal
YUV SOY Component video with sync on Y
CVBS Composite video
S-Video Super video
INP 1 PRIORITY
When signal on both inputs, input 1 has the priority.
INP 2 PRIORITY
When signal on both inputs, input 2 has the priority.
INP1 Input 1 selected
HD-SDI -
SDI
INP2 Input 2 selected
DVI HDCP DVI HDCP High definition content protected DVI input
DVI equalization
When a standard DVI module is selected, press ENTER to go in edit mode. Use ◄ or ► to key to change the equalization value.
Default value = 13.
For non DVI-compliant transmitter, stronger equalization may be nece
ssary even for shorter cables.
For longer cables adjust between 0 and 13 (more equalization).
For shorter cables adjust between 13 and 15 (least equalization).
Advanced settings for 5 cable input
For RGB with separate sync or YUV with separate sync the sync level can be toggled between Analog or Digital.
Use the ▲ or ▼ key to select Advanced settings.The5 cable advanced box opens.
Press ENTER to toggle between Analog or Digital.
Image 8-5
8.3 Input locking
What is possible?
The output signal can be locked on an internal sync signal or on the sync signal of one of the input sources. Input locking can avoid
that some windows in the output signal are slowly moving or trembling.
When automatic is selected, the lock will be set on the input signal of the main window.
How to set up?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Input locking and press ENTER.
The input locking window is displayed. The actual selected locking method is indicated by an arrow.
4. Use the ▲ or ▼ key to select the desired locking and press ENTER. (image 8-6, image 8-7, image 8-8)
R59770021 CLM R10+ 11/10/2010 65