Filter
Top Products
5-13
Log Print
This is a detailed list of the processed print jobs (maximum 22). Use this list to
confirm that jobs were printed correctly.
See
For an example of the print log, refer to 8.4.2 “Confirming the Print Log”.
5
5
.
.
3
3
.
.
5
5
N
N
e
e
t
t
w
w
o
o
r
r
k
k
Use this to make network settings.
Look
You cannot change this setting while the printer is processing print data.
You must restart the printer for settings to take effect. After configuring items, be
sure to restart the printer.
Ethernet
Use this to set Ethernet communication speed and mode.
• Auto (default)
10Base-T Half, 10Base-T Full, 100Base-TX Half, or 100Base-TX Full is selected
automatically.
• 10Base/Half
• 10Base/Full
• 100Base/Half
• 100Base/Full
TCP/IP
Use this to make TCP/IP settings. This menu contains the following:
• Setup IP Address
Select the how to obtain an IP address. Parameters are as follows:
DHCP (default)
The IP address is obtained from a DHCP server on the network.
Panel
Use this to set the IP address from the control panel.