Filter
Top Products
6 - 5 WALK-UP PHOTOCAPTURE CENTER
™
The DCP can only read one Media card at a time so do not insert
more than one card. The settings that you want to use with the card
will be kept until you take out the media card from the drive (slot),
print images or press
Stop/Exit
.
1
Insert the media card firmly into the media drive (slot).
2
When you insert your media card
into the proper slot, the LCD shows.
3
Press
Options
.
The LCD shows:
(See Changing the settings for
printing images on page 6-8.)
The media active message will be shown for 60 seconds and
then the display will return to standby mode.
Even in that case, you can enter the Photo Capture mode by
pressing
Photo Capture
.
C.FLASH ACTIVE
Press PhotoCapture for ---
CHANGE SETTINGS
NO. OF COPIES:01