Filter
Top Products
12 - 3
MAKING COPIES
Using the Options Key
Use the
Options
key to set number of copies, paper type, paper size, brightness,
enlargement/reduction ratio and special copy options
for the next copy only
.
Paper Type
You can change the paper type setting for the next copy only.
1
Place the original face down in the ADF.
2
Use the dial pad to enter the number of copies you want (up to 99).
3
Press Options and press to select OPT:PAPER TYPE, and then press
Menu/Set.
4
Press to select the type of paper you are using (PLAIN, INKJET,
GLOSSY or TRANSPARENCY), and then press Menu/Set.
5
If you selected GLOSSY, press to select 4-COLOR or 3-COLOR, and
then press Menu/Set.
6
Press Black Copy or Color Copy—OR—Press for additional settings.
Press
Options
Menu Selections Options
Factory
Setting
OPT:#OF
COPIES01
NO. OF COPIES:XX 01
OPT:PAPER TYPE
PLAIN/INK JET/GLOSSY
(4-COLOR or 3-COLOR)/
TRANSPARENCY
PLAIN
OPT:PAPER SIZE LETTER/LEGAL/A4/
POST CARD
: 4" × 6"
LETTER
OPT:QUALITY
NORMAL/BEST/FAST
NORMAL
OPT:BRIGHTNESS
-+ -+
OPT:ELG/RDC 50%/78% LGL>LTR/
94% A4>LTR/100%/
104% EXE>LTR/150%/
200%/ZOOM
100%
OPT:SPECIAL OFF (1 IN 1) OFF (1 IN 1)
Note
The print quality of black ink varies depending on the kind of glossy paper you
are using. Black ink is used when you select 4-COLOR. If the glossy paper you
are using repels the black ink, select 3-COLOR, which simulates black ink by
combining the three ink colors.
or
or
or
or