Filter
Top Products
INITIAL SETUP
5 - 4
Setting the Ring Volume
1
Press Menu/Set, 1, 5, 1.
2
Press select (OFF, LOW or HIGH), and then press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your fax machine is idle. You can turn the
ring OFF or you can select a ring volume level.
Press to adjust the volume level. With each key press, the fax machine rings
so you can hear the active setting as the LCD shows it. Each key press changes
the volume. The new setting will remain until you change it again.
Setting the Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the fax machine beeps every time
you press a key or make an error and when fax sending or receiving is finished.
1
Press Menu/Set, 1, 5, 2.
2
Press to select your option.
3
When the LCD shows the option you want, press Menu/Set.
Press Stop/Exit.
If you do not enter a fax number, no additional information can be entered.
NOTICE
The Telephone Consumer Protection Act of 1991 makes it unlawful
for any person to use a computer or electronic device to send any
message via a telephone fax machine unless such messages clearly
contain, in a margin at the top or bottom of each transmitted page,
or on the first page of the transmission, the date and time it is sent
and an identification of the business or other entity or other
individual sending the message and the telephone number of the
sending machines or such business, other entity or individual.
In order to program this information into your fax machine,
complete the steps described on page 5-2.
1.RING
or
or
2.BEEPER
or