Filter
Top Products
INITIAL SETUP
5 - 6
Choosing the Handset Volume (For Volume Amplify)
Before you begin to use the machine, you must decide if you need to set the
handset volume to VOL AMPLIFY: ON for a user who is hearing-impaired.
The AMPLIFY volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired.
During a conversation, users can press Volume on the control panel to
adjust the volume to LOW or HIGH. When the handset is replaced, the handset
volume will remain until you change it again.
VOLUME AMPLIFY: ON—TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press Volume
on the control panel to adjust the
volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the
handset volume returns to the default setting of LOW.
VOLUME AMPLIFY:ON—PERMANENT
Choose
VOL AMPLIFY:ON
—
PERMANENT
if all of the users are
hearing-impaired. During a conversation, users can press Volume
on the
control panel to adjust the volume to
LOW
,
HIGH
or
AMPLIFY
. When the
handset is replaced, the handset volume returns to the default setting of
AMPLIFY
.
WARNING
It is important that you do NOT choose PERMANENT unless ALL the
users are hearing-impaired. Otherwise, the default setting of AMPLIFY may
damage the hearing of some users.
Setting Volume Amplify
Please carefully read Choosing the Handset Volume on page 5-6 before you do
the following steps:
1
Press Menu/Set, 1, 5, 5.
When you press Volume on the control panel to adjust the volume, the
LCD shows the setting you are choosing. Each key press changes the volume
to the next setting.
or
or
or
or
5.VOLUME AMPLIFY