Filter
Top Products
7 - 5
SETUP SEND
Real Time Transmission
When you are sending a fax, the fax machine will scan originals into memory
before sending. Then, as soon as the phone line is free, the fax machine will start
dialing and sending the fax. If memory becomes full, the fax machine will send
the document in real time (even if REAL TIME TX is set to OFF).
Sometimes you may want to send an important document immediately, without
waiting for memory transmission. You can set REAL TIME TX to ON.
1
Place the original face down in the ADF.
2
Press Menu/Set, 2, 2, 5.
3
To change the default setting, press to
select ON (or OFF), and then press Menu/Set.
Go to Step 5—OR—For the next fax transmission only, press
to select
NEXT FAX ONLY, and then press Menu/Set.
4
For the next fax only, press to select ON (or OFF),
and then press Menu/Set.
5
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings, and
then go to Step 6.
6
Enter fax number, and then press Black Fax Start.
Checking Job Status
Check which jobs are still waiting in memory to be sent. (If no jobs are waiting,
the LCD shows
NO JOB WAITING
.) (
See Canceling a Job in Memory
, page 7-
6.)
1
Press Menu/Set, 2, 6.
2
If you have multiple jobs waiting, press to scroll through the list.
3
Press Stop/Exit.
If you are sending a color Fax, the fax machine will send it in real time even if
REAL TIME TX is set to OFF.
5.REAL TIME TX
or
or
or
or