Filter
Top Products
5 - 5
INITIAL SETUP
Setting the Speaker Volume
1
Press Menu/Set, 1, 5, 3.
2
Press to select LOW, MED, HIGH or OFF, and then press Menu/Set.
3
Press Stop/Exit.
—OR—
If you are using Hook/Hold, you can adjust the speaker volume while dialing.
You can turn the speaker off or you can select a speaker volume level. The
default setting is the lowest volume.
Press
to adjust the volume level. With each key press, the volume changes
as the LCD shows the active setting. The new setting will remain until you
change it again.
Setting the Handset Volume
1
Press Menu/Set, 1, 5, 4.
2
Press to select
HIGH
(or
LOW
), and then press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the handset volume any time you are talking on the telephone.
There are two handset volume levels, LOW and HIGH. The default setting is
LOW.
Press to adjust the volume level. The LCD shows the setting you are
choosing. The new setting will remain until you change it again.
3.SPEAKER
or
or
4.HANDSET
or
or