Filter
Top Products
Chapter 5: Local Management
Page 5-58 2H22-08R SmartSwitch 2208 User’s Guide
To access the Port Redirect Function screen from the Device Specific
Configuration Menu screen use the arrow keys to highlight the PORT
REDIRECT FUNCTION menu item and press ENTER. The Port
Redirect Function screen displays.
Figure 5-22 Port Redirect Function Screen
The following definitions briefly explain each field of the Port Redirect
Function screen:
Source Port (Read-only)
Shows which ports are currently set as source ports as described in
Section 5.15.1.
Destination Port (Read-only)
Shows which ports are currently set as destination ports as described in
Section 5.15.1.
Remap Errors (Read-only)
Displays whether the corresponding source ports are configured to send
errored frames to the destination ports, or to drop all errored frames
before forwarding traffic as described in Section 5.15.3.
Firmware Revision: XX.XX.XX
Port Redirect Function
1960_22
BOOTPROM Revision: XX.XX.XX
Source Port:
1
1
1
2
2
3
3
3
Destination Port:
2
3
4
1
3
4
5
6
Device Type: 2H22-08R
Remap Errors:
ON
ON
ON
OFF
OFF
ON
ON
ON
============ ============ ============
2H22-08R LOCAL MANAGEMENT
Event Message Line
SAVE
PREVIOUS
RETURN
RETURN
NEXT
Source Port [1] Destination Port [1] Status [ADD]
EXIT
Errors [ON]