Filter
Top Products
Switch Configuration Screen
2H22-08R SmartSwitch 2208 User’s Guide Page 5-37
The designated workstations now receive traps from the 2H22-08R.
5.10 SWITCH CONFIGURATION SCREEN
The Switch Configuration screen, Figure 5-17, provides the basic setup
options to make a switch operational in your network.
To access the Switch Configuration screen from the Device Configuration
Menu screen, use the arrow keys to highlight the SWITCH
CONFIGURATION menu item and press ENTER. The Switch
Configuration screen displays showing Ports 1 through 8.
NOTE
Exiting without saving causes a “NOT SAVED?” message to
appear above the SAVE command. Edits are lost if they are not
saved before exiting.
NOTE
The Switch Configuration Screen will not be available if the
operational mode of the device has been set to SECURE FAST
VLAN. This screen may only be used by devices configured to
operate as 802.1D or 802.1Q switches.