Filter
Top Products
Chapter 3: Installation
Page 3-2 2H22-08R SmartSwitch 2208 User’s Guide
3.2 UNPACKING THE 2H22-08R
To unpack the 2H22-08R and verify the contents of the shipment, proceed
as follows:
1. Open the carton and remove the packing material protecting the
2H22-08R.
2. Verify the contents of the carton as listed in Table 3-1.
3. Remove the black and yellow tape seal on the non-conductive bag to
remove the 2H22-08R.
4. Perform a visual inspection of the device for any signs of physical
damage. If there are any items missing or damaged, contact Cabletron
Systems Global Call Center as described in Section 1.7.
3.3 INSTALLING OPTIONS
If the 2H22-08R is to be installed with an optional Fast Ethernet Interface
Module, refer to Appendix C for installation instructions.
Table 3-1 Contents of 2H22-08R Carton
Item Quantity
2H22-08R 1
Antistatic Wrist Strap 1
Console Cable Kit 1
Rackmount Kit 1
Strain-Relief Bracket 1
Power Cord 2
NOTE
Install any optional equipment before proceeding to
Section 3.4.