Filter
Top Products
Port Redirect Function Screen
2H22-08R SmartSwitch 2208 User’s Guide Page 5-59
Source Port [
n
] (Selectable)
Allows a selected port [n] to be changed to a source port as described in
Section 5.15.1.
Destination Port [
n
] (Selectable)
Allows a selected port [n] to be changed to a destination port as described
in Section 5.15.2.
Errors (Toggle)
Allows the user to configure the source ports to either send errored frames
to selected destination ports, or to drop errored frames, and send only
valid traffic to the destination ports. The default setting of this field is
[ON], refer to Section 5.15.1 and Section 5.15.2 for more information
about setting this field.
Status (Selectable)
Allows you to add or delete the source and destination ports selected in
the Source Port [n] and Destination Port [n] fields as described in
Section 5.15.2.
5.15.1 Displaying the Source and Destination Entries
There can be more than one Port Redirect Function screen depending on
the number of port redirect entries. Each screen displays up to ten port
redirect entries. If there is more than one screen of redirect entries, the
NEXT and/or PREVIOUS command displays at the bottom of the
screen, allowing the user to navigate to either the next or previous screen.
For example, with three screens of entries, the NEXT command is
displayed at the bottom of the first screen. In the second screen, the
NEXT and PREVIOUS commands displays. In the last screen, only the
PREVIOUS command displays.
To display the next screen, use the arrow keys to highlight NEXT. Press
ENTER and the next screen of entries is displayed.
To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries in the previous screen.