Filter
Top Products
Chapter 5: Local Management
Page 5-70 2H22-08R SmartSwitch 2208 User’s Guide
The following definitions explain each field of the Interface Statistics
screen:
Interface (Read-only)
This field displays the Interface number for which statistics are currently
being displayed. Figure 5-26 shows the Interface field displaying 1. This
represents port 1 of the 2H22-08R. To view other interface statistics, refer
to Section 5.19.1.
Name (Read-only)
The Name field displays the type of interface for which statistics are
being displayed.
InOctets (Read-only)
This field displays the total number of octets (bytes) that have been
received on the Interface. This includes all octets from bad frames, and
Frame Check Sequence (FCS) octets.
InUnicast (Read-only)
The InUnicast field displays the total number of packets that have been
received that were sent to a single address.
InNonUnicast (Read-only)
This field displays the total number of packets that have been received
that were delivered to a broadcast or multicast address.
InDiscards (Read-only)
The InDiscards field displays the total number of inbound packets that
were discarded, even though the packets contained no errors. This field
may increment because the switch needed to free up buffer space, or the
switch was being overutilized.
InErrors (Read-only)
This field displays the total number of inbound packets that have been
discarded because they contained errors. This field represents the total
number of errored frames, regardless of the cause of the error.
InUnknownProtos (Read-only)
The InUnknownProtos field displays the total number of packets that
were discarded because the packets were in an unknown, or unsupported,
format.