Filter
Top Products
Network Tools
2H22-08R SmartSwitch 2208 User’s Guide Page 5-91
link_trap:
Syntax: link_trap [enable/disable/status] [PORT/all]
Description: The link_trap command allows link traps to be
enabled or disabled when specifying a single
port, or simultaneously when specifying “all”
or no ports. When one or all ports are specified
to enable, disable or find their status, their
current condition is displayed.
Options: Not Applicable
Example:
-> link_trap status 3
Link traps are ENABLED on port 3
-> link_trap disable all
2364_lnktrp
Link traps have been DISABLED on all ports (1 through 8)