Cabletron Systems 2208 Switch User Manual


 
Management Terminal Setup
2H22-08R SmartSwitch 2208 User’s Guide Page 5-7
5.3.4 Telnet Connections
Once the 2H22-08R has a valid IP address, you can establish a Telnet
session with Local Management from any TCP/IP based node on the
network. Telnet connections to the 2H22-08R require the Community
Name passwords assigned at the SNMP Community Names screen of the
2H22-08R.
For information about setting the IP address, refer to Section 5.7.
For information about assigning Community Names, refer to Section 5.8.
Refer to the instructions included with the Telnet application for
information about establishing a Telnet session.