Filter
Top Products
Chapter 5: Local Management
Page 5-22 2H22-08R SmartSwitch 2208 User’s Guide
5.7.3 Setting the Default Gateway
If the SNMP management station is located on a different IP subnet than
the 2H22-08R, a default gateway must be specified. When a SNMP Trap
is generated, the 2H22-08R sends the Trap to the default gateway. To set
the default gateway, perform the following steps:
1. Use the arrow keys to highlight the Default Gateway field.
2. Enter the IP address of the default gateway using the DDN format.
For example: 134.141.79.121
3. Press ENTER. If the default gateway entered is a valid format, the
cursor returns to the beginning of the Default Gateway field. If the
entry is not valid, the screen displays “INVALID DEFAULT
GATEWAY OR FORMAT ENTERED”. Local Management does not
alter the current value, but it does refresh the Default Gateway field
with the previous value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The message “SAVED OK” displays at the top of the
screen.