Cabletron Systems 2208 Switch User Manual


 
Connecting to the Network
2H22-08R SmartSwitch 2208 User’s Guide Page 3-11
2. Insert one end of the SC connector into the FE-100FX or FE-100F3
installed in the 2H22-08R. See Figure 3-9.
3. At the other end of the fiber optic cable, attach the SC connector to the
other device.
Figure 3-9 FE-100FX and FE-100F3 Ports
!
CAUTION
Do not touch the ends of the fiber optic strands, and do not let
the ends come in contact with dust, dirt, or other contaminants.
Contamination of the ends causes problems in data
transmissions. If the ends become contaminated, clean them
with alcohol using a soft, clean, lint-free cloth.
2251-34
RX LED
TX LED
8
7