Filter
Top Products
Interface Statistics Screen
2H22-08R SmartSwitch 2208 User’s Guide Page 5-71
OutOctets (Read-only)
This field displays the total number of octets (bytes) that have been
transmitted from the Interface. This includes all Frame Check Sequence
(FCS) octets.
OutUnicast (Read-only)
The OutUnicast field displays the total number of packets transmitted that
were sent to a single address.
OutNonUnicast (Read-only)
This field displays the total number of packets transmitted to a broadcast
or multicast address.
OutDiscards (Read-only)
The OutDiscards field displays the total number of outbound packets that
were discarded, even though the packets contained no errors. This field
may increment, because the switch needed to free up buffer space, or the
switch was being overutilized.
OutErrors (Read-only)
This field displays the total number of outbound packets discarded
because they contained errors. This field represents the total number of
errored frames, regardless of the cause of the error.
OutQLen (Read-only)
The OutQLen field displays the length of the packet queue. The field
represents the number of packets in the queue.
Address (Read-only)
This field displays the MAC Address of the interface that is currently
being displayed.
Last Change (Read-only)
This field displays the last time that the interface was reset.
Admin Status (Read-only)
This field displays the current status of the interface. If this field displays
“Testing”, no packets may be passed on this interface.